Regviz

Renesas Electronics /R7FA6E2BB /ADC120 /ADCMPCR

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as ADCMPCR

Share

Cut and paste this URL to share the unmodified register and value:

https://regviz.com/r/Renesas Electronics/R7FA6E2BB/ADC120/ADCMPCR#0x0

15 1211 87 43 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 (00)CMPAB 0 (0)CMPBE 0 (0)CMPAE 0 (0)CMPBIE 0 (0)WCMPE 0 (0)CMPAIE

CMPAE=0, CMPBE=0, CMPAIE=0, WCMPE=0, CMPAB=00, CMPBIE=0

Description

A/D Compare Function Control Register

Fields

CMPAB

Window A/B Composite Conditions Setting

0 (00): Output ADC120_WCMPM when window A OR window B comparison conditions are met. Otherwise, output ADC120_WCMPUM.

1 (01): Output ADC120_WCMPM when window A EXOR window B comparison conditions are met. Otherwise, output ADC120_WCMPUM.

2 (10): Output ADC120_WCMPM when window A AND window B comparison conditions are met. Otherwise, output ADC120_WCMPUM.

3 (11): Setting prohibited.
CMPBE

Compare Window B Operation Enable

0 (0): Disable compare window B operation. Disable ADC120_WCMPM and ADC120_WCMPUM outputs.

1 (1): Enable compare window B operation.
CMPAE

Compare Window A Operation Enable

0 (0): Disable compare window A operation. Disable ADC120_WCMPM and ADC120_WCMPUM outputs.

1 (1): Enable compare window A operation.
CMPBIE

Compare B Interrupt Enable

0 (0): Disable ADC120_CMPBI interrupt when comparison conditions (window B) are met.

1 (1): Enable ADC120_CMPBI interrupt when comparison conditions (window B) are met.
WCMPE

Window Function Setting

0 (0): Disable window function Window A and window B operate as a comparator to compare the single value on the lower side with the A/D conversion result.

1 (1): Enable window function Window A and window B operate as a comparator to compare the two values on the upper and lower sides with the A/D conversion result.
CMPAIE

Compare A Interrupt Enable

0 (0): Disable ADC120_CMPAI interrupt when comparison conditions (window A) are met.

1 (1): Enable ADC120_CMPAI interrupt when comparison conditions (window A) are met.

Links

()

Register License

This software is supplied by Renesas Electronics Corporation and is only intended for use with Renesas products. No other uses are authorized. This software is owned by Renesas Electronics Corporation and is protected under all applicable laws, including copyright laws.

THIS SOFTWARE IS PROVIDED “AS IS” AND RENESAS MAKES NO WARRANTIES REGARDING THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED. TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Renesas reserves the right, without notice, to make changes to this software and to discontinue the availability of this software. By using this software, you agree to the additional terms and conditions found by accessing the following link: http://www.renesas.com/disclaimer

 ()

Register Reference

https://github.com/cmsis-svd/cmsis-svd-data